HighLevel Conversation AI can be deployed to selected supported channels, including SMS, Email, Facebook, Instagram, WhatsApp, Live Chat, and Chat Widget. A bot can use the same configured instructions and training across those deployments, but creating one does not activate it everywhere. Each required channel and connected destination must be configured and tested.
This distinction matters when a contact changes channels. A bot deployed to Instagram and SMS may use the same configuration, but that setup alone does not prove that an Instagram thread and a later SMS conversation share context. Test continuity in the specific account before promising it to customers.
The current deployment path is AI Agents > Conversation AI > Agents List. Select or create a bot, configure it, and use its Deploy tab to assign channels and destinations. Available channels, destinations, actions, and prerequisites depend on the account and its connections.
One bot deployed to multiple selected channels means shared bot configuration, not proof that separate channel threads share conversation context.
What one HighLevel Conversation AI bot can do across channels
HighLevel documents Conversation AI support for SMS, Email, Facebook, Instagram, WhatsApp, Live Chat, and Chat Widget. A bot can be assigned to more than one supported channel, provided it is deployed to each required channel and connected destination.
Live Chat and Chat Widget are distinct official channel labels. “Website chat” is a useful broad description, but it is not precise enough for configuration. Use the actual channel and widget settings shown in the account.
Centralized deployment gives a team one place to manage the bot’s instructions, training, goals, and response mode across selected destinations. It does not establish a universal cross-channel thread. For example, a lead may message an Instagram account and later text a phone number. The bot may use the same approved business information in both places, while the available conversation history and routing behavior still depend on the specific channel configuration.
See HighLevel’s official channel deployment and routing guide for current channel options, destinations, widget setup, and routing conditions.
Prepare the bot before choosing channels
Define the bot’s job before enabling any channel. Record the questions it may answer, information it may collect, actions it may take, and situations that require a person. Identify the connected destinations needed for the selected channels, such as a phone number, page, social account, inbox, or widget.
Prepare current business information and assign an owner for changes to pricing, hours, eligibility, policies, and service availability. HighLevel supports training sources such as website pages, FAQs, documents, tables, rich text, and Google Drive files. Add approved material to a Knowledge Base, wait for processing to finish, and connect it to the bot. Templates can populate foundational prompts, but they are starting configurations rather than tested production workflows.
Before configuration, record the intended channel and destination, bot purpose, response mode, approved sources, required contact fields, and human escalation owner. If a reliable tag or connected destination already expresses a routing rule, use that deterministic signal instead of adding an AI classification step. Explicit rules are easier to inspect, reproduce, and test.
Deploy the bot to channels and destinations
In the current documented workflow, channel assignments are managed from the bot’s Deploy tab:
Check the actual connected destination for every assignment before testing. A widget connection should be tested independently from social, SMS, and email deployments. GoHighLevel setup support is available for teams that need help configuring destinations and assignments.
Route conversations with explicit rules
HighLevel routing can use the messaging channel, connected destination, contact tags the contact has, and tags the contact does not have. Tag conditions can use AND or OR logic. A direct bot assignment takes priority over ordinary channel-and-tag matching. HighLevel prevents identical routing configurations from being assigned to multiple bots, but distinct overlapping conditions still need deliberate design.
Prefer a known tag or destination when it already expresses the business rule. For example, a premium-customer tag is more inspectable than asking an AI model to infer customer status from a message.
| Trigger or contact condition | Routing rule | Expected bot | Test |
|---|---|---|---|
| Premium tag on Chat Widget 1 | Widget 1 and Has tag: premium | Premium Customers Bot | Use a premium-tagged contact and verify the responding bot. |
| Regular tag on Chat Widget 1 | Widget 1 and Has tag: regular | Regular Customers Bot | Confirm a regular contact does not reach the premium bot. |
| Neither tag | No matching tag condition | Defined fallback or no bot | Record the intended result instead of assuming a fallback. |
| Both tags or direct assignment | Overlapping conditions or direct assignment | Explicitly chosen route | Test the collision and inspect the bot information. |
The bot names in this table are hypothetical. For each live rule, test a matching contact, a non-matching contact, and a collision case such as a contact with both tags. Also remove a tag and retest if tag changes are part of the operating process.
Use channel, destination, direct assignment, and explicit tags when those values already express the rule. Do not add free-form AI classification merely to decide whether a contact is premium, regular, support-related, or assigned to a location.
Train and test answers before launch
Conversation AI searches connected training content and uses relevant information to generate a response. A successful upload or crawl does not show that the correct content can be retrieved or that the resulting answer is suitable.
Use HighLevel’s Knowledge Base Retrieval Tester first to check whether relevant source content can be found. Then test the complete bot response, which also reflects instructions, goals, actions, and behavior. If retrieval fails, check source processing and the bot’s Knowledge Base connection. If retrieval succeeds but the answer is unsuitable, review the prompt, goals, actions, and escalation behavior.
- Test a direct question and a paraphrase, such as “What are your service hours?” and “When can I reach you?”
- Test changeable facts such as pricing, hours, eligibility, and policies. Confirm the approved source is current and remove duplicate or conflicting material.
- Ask an out-of-scope question and confirm the bot follows the intended human handoff or fallback.
- After changing an important source, repeat retrieval and full-response tests. Give an owner responsibility for updates and a review cadence.
HighLevel’s training and testing guide describes supported sources and the distinction between retrieval testing and full bot testing.
Choose a response mode and define the next action
Conversation AI has three response modes. Off leaves automatic bot responses disabled. Suggestive drafts a response for a person to review and send. Autopilot sends replies automatically according to the bot’s configuration. New bots may start Off and require an explicit status change.
Use Suggestive mode while behavior is new or when an incorrect reply would carry high cost. Consider Autopilot only after testing common questions, paraphrases, unknown questions, appointment behavior, workflow triggers, and escalation behavior.
Depending on configuration, a bot can collect contact details, support appointment booking or changes, and trigger configured actions or workflows. For an appointment request, use a bounded sequence:
- Ask for the required contact details and appointment information.
- Validate the values and formats before using them.
- Check calendar availability through the configured booking setup.
- Run the configured booking action only after the required fields and slot are confirmed.
- Send incomplete, unavailable, or unsupported requests to the named human owner.
HighLevel documents examples including name, email, phone, appointment scheduling, rescheduling, and cancellation. Exact fields and actions depend on the bot and account configuration. AI agent design and implementation can help teams define bounded responsibilities and human handoffs.
- Every enabled channel has the intended connected destination.
- At least one matching, one non-matching, and one collision case has been tested for each important route.
- Knowledge retrieval and the complete bot response have both been checked.
- An out-of-scope question reaches the intended human fallback.
- Required contact fields and appointment availability are validated before a configured action is treated as complete.
- A named person owns escalations and business-source updates.
Account for Email and other channel-specific constraints
Email is a supported Conversation AI channel, but it has its own connection, sender, primary-bot, formatting, and thread considerations. Before enabling it, verify the connected inbox, sender settings, thread behavior, and any primary-bot requirement in the current account.
Inbound email replies are supported, but the Conversation AI Workflow Action does not currently support the Email channel. Do not design an Email process around that action. More broadly, verify channel-specific prerequisites because an action available in one channel or bot configuration may not be available in another.
Consult HighLevel’s official Email channel guide for the current inbound-email limitations and connection details.
Separate operational records when measuring or exporting data
If the team later exports Conversation AI data for analytics or an external system, define the record grain before building the integration. A generation record should represent one AI generation or response observation. A conversation record should represent one conversation. A retrieved-source record should represent one source attached to one generation. A daily summary should be keyed by its period and dimensions, such as sub-account, channel, bot, and response mode.
This is proposed implementation guidance, not a HighLevel-published schema. Use a verified vendor generation or event identifier as the database-enforced unique key when one is available. If no stable identifier exists, define a composite key only after confirming its grain, such as sub-account, conversation, message, and generation identifiers. Use a transactional upsert or equivalent uniqueness constraint when concurrent workers may process the same observation. Do not rely on lookup-then-create as the only duplicate-prevention mechanism.
Keep raw observations separate from reported summaries and CRM contact or deal events. A contact update may be one business event, while several AI generations can occur in the same conversation. HighLevel documents a Public API for agent management, action management, and generation-detail retrieval, but it does not publish a complete CRM synchronization recipe with field mappings, retries, webhooks, or idempotency guarantees.
Verify routing and measure the operation after launch
Sample conversations across configured channels and destinations after rollout. Confirm the responding bot in the Conversation AI Bot panel or AI Response Info, then retest after tag changes, direct assignments, or routing edits.
Track operational measures such as routing mismatches, unanswered conversations, human handoffs, and completion of configured actions. Define the measurement period and channel scope before comparing results. A change in a metric is an operational observation, not proof that the bot alone caused it.
Use failures to improve the specific rule, source, response mode, or escalation path, then rerun the relevant test cases. Begin with a narrow set of channels and deterministic routes, use Suggestive mode where review is important, and expand automatic replies only when the results support that decision.
For further detail, consult HighLevel’s official setup and testing guide and its Conversation AI overview.
